Research of reinforcement of a new strength class A550SK
https://doi.org/10.37538/0005-9889-2023-5/6(619)-62-70
Abstract
The high level of production quality of electrometallurgical enterprises made it possible to achieve small values of the coefficients of variation of the controlled parameters and introduce a new value into the nominal range of reinforcement classes. In order to launch the production of a new strength class of A550SK reinforcement, studies were conducted to determine the complex of consumer properties. The positive results of the research allowed us to standardize a new strength class, the use of which will allow us to achieve an economic effect by reducing steel consumption.
About the Authors
O. O. Tsyba
Novostal-M Holding
Russian Federation
Russian Federation
Oleg O. Tsyba*, Cand. Sci. (Engineering), Head of the Department of New Products of Novostal-M, Head of SK4 “Reinforcing bars for reinforced concrete structures” at TC 375 “Metal products from ferrous metals and alloys”, Moscow
e-mail: cyba.o.o@novostal-m.ru
N. N. Trekin
Moscow State University of Civil Engineering (National Research University); JSC "Central Research and Design Experimental Institute of Industrial Buildings and Structures" (JSC "Tsniipromzdaniy")
Russian Federation
Russian Federation
Nikolay N. Trekin, Dr. Sci. (Engineering), Professor of the Moscow State University of Civil Engineering; Deputy Director, Scientific Director of JSC “Tsniipromzdaniy”, Moscow
e-mail: nik-trekin@yandex.ru
E. N. Kodysh
JSC "Central Research and Design Experimental Institute of Industrial Buildings and Structures" (JSC "Tsniipromzdaniy")
Russian Federation
Russian Federation
Emil N. Kodysh, Dr. Sci. (Engineering), Professor, Chief Researcher of JSC “Tsniipromzdaniy”, Moscow
e-mail: otks@yandex.ru
N. N. Baglaev
KTB Beton Group
Russian Federation
Russian Federation
Nikolay N. Baglaev, General Director of KTB Beton Group, Moscow
e-mail: n.baglaev@ktbbeton.com
A. V. Shevchenko
KTB Beton Group
Russian Federation
Russian Federation
Andrey V. Shevchenko, Cand. Sci. (Engineering), Chief Engineer of KTB Beton Group, Moscow
e-mail: a.shevchenko@ktbbeton.com
References
1. Tsyba O.O., Dyachkov V.V., Savrasov I.P., Panchenko A.I. About the new interstate standard GOST 34028-2016 “Steel for the reinforcement for concrete”. <i>Bulletin of Belgorod State Technological University named after V.G. Shukhov.</i> 2017, no 3, pp. 23–31. (In Russian).
2. State Standard 34028-2016. Reinforcing rolled products for reinforced concrete constructions. Specifications. Moscow: Standartinform Publ.; 2019. (In Russian).
3. STO ASCHM 7-93. Deformed reinforcing rolled products. Specifications. Moscow: Association of Enterprises and Organizations for standardization of Ferrous Metallurgy products – “Chermetstandart”; 2007. (In Russian).
4. State Standard R 52544-2006. Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications. Moscow: Standartinform Publ.; 2006. (In Russian).
5. State Standard 10884-94. Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications. Moscow: Standartinform Publ.; 2009. (In Russian).
6. EN 1998-1-1:1994. Eurocode 8: Design of structures for earthquake resistance.
7. SP 14.13330.2018. Seismic building design code. Updated version of SNiP II-7-81*. Moscow: Standartinform Publ.; 2018. (In Russian).
8. SP 16.13330.2017. Steel structures. Updated version of SNiP II-23-81*. Moscow: Standartinform Publ.; 2019. (In Russian).
9. SP 63.13330.2018. Concrete and reinforced concrete structures. General provisions. Moscow; 2018. (In Russian).
10. Crack resistance and deformability of stretched reinforced concrete with non-stressed and tensioned rod reinforcement having a different relative area of crushing of transverse ribs. Tsyba O.O., abstract of the dissertation of the Cand. Sci. (Engineering), JSC RCC, 2011. (In Russian).
11. Zikeev L.N., Tsyba O.O. Crack resistance of reinforced concrete stretched elements, taking into account the relative area of crushing of stretched reinforcement. <i>Promyshlennoe i grazhdanskoe stroitel'stvo</i> [Industrial and Civil Engineering]. 2009, no. 10, pp. 30–32. (In Russian).
12. State Standard 12004-81. Reinforcing-bar steel. Tensile test methods. Moscow: Standartinform Publ.; 2009. (In Russian).
13. State Standard 14098-2014. Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions. Moscow: Standartinform Publ.; 2015. (In Russian).
14.
Review
For citations:
Tsyba O.O., Trekin N.N., Kodysh E.N., Baglaev N.N., Shevchenko A.V. Research of reinforcement of a new strength class A550SK. Concrete and Reinforced Concrete. 2023;619(5/6):62-70. (In Russ.) https://doi.org/10.37538/0005-9889-2023-5/6(619)-62-70
Views:
761
Email this article 