Monitoring of the regulatory framework in the field of design and construction of mechanical butt joints of high factory readiness for precast concrete and reinforced concrete structures of buildings
Abstract
The results of the analysis and monitoring of normative and technical documents (NTD) in the field of design and construction of mechanical butt joints of high factory readiness for precast concrete and reinforced concrete structures of buildings are presented. The normative documents regulating the requirements in the field of design and detailing of mechanical butt joints of high factory readiness, including an analysis of the regulatory, methodological and technical documents available both in our country and abroad, are considered. The shortcomings of regulatory documents are analyzed: repeated technical requirements, references to canceled NTDs, contradictions in various standards of requirements for structures. Proposals were formed on the feasibility of performing additional scientific research work in the form of RW and R&DW, as well as proposals for updating existing and developing missing BS and standards in the NTD system.
About the Authors
M. M. Kozelkov
Research Institute of Concrete and Reinforced Concrete named after A.A. Gvozdev (NIIZHB), JSC Research Center of Construction
Russian Federation
Russian Federation
Candidate oа Sciences (Engineering), Head of the Center No. 22 for design and expertise
e-mail: centr22@mail.ru
A. V. Lugovoy
Research Institute of Concrete and Reinforced Concrete named after A.A. Gvozdev (NIIZHB), JSC Research Center of Construction
Russian Federation
Russian Federation
Deputy Head of the Center No. 22 for design and expertise
e-mail: centr22@mail.ru
References
1. Code of Rules 335.1325800.2017 Large-panel structural systems. Design rules”. Moscow. 2017. (In Russian).
2. Code of Rules 337.1325800.2017 “Reinforced concrete precast-monolithic structures. Design rules”. Moscow. 2017. (In Russian).
3. Code of Rules 355.1325800.2017 “Frame structures of reinforced concrete prefabricated one-storey buildings for industrial purposes. Design rules”. Moscow. 2017. (In Russian).
4. Code of Rules 356.1325800.2017 “Prefabricated reinforced concrete frame structures for multi-storey buildings. Design rules”. Moscow. 2017. (In Russian).
5. Recommendations for the design and implementation of contact joints with breakage of reinforcement in reinforced concrete columns of multi-storey buildings. Moscow: NIIZhB. 1985. (In Russian).
6. Recommendations for the calculation of the frames of multi-storey buildings, taking into account the flexibility of nodal junctions of prefabricated reinforced concrete structures. Moscow: TsNIIPromzdaniy, 2002. (In Russian).
7. Mordich A.I., Galkin S.L., Petrov V.N. Frame of the house-building system “ARKOS”. Reliability and safety. <i>Beton i zhelezobeton.</i> [Concrete and reinforced concrete]. 2013. No. 2, pp. 27–31. (In Russian).
8. Typical building structures, products and assemblies. Series B1.020.1-7. Prefabricated monolithic frame system MVB-1 with flat ceilings for buildings for various purposes. BelNIIS. Minsk: Minsktipproekt. 1999. (In Russian).
9. Mordich A.I., Vigdorchik R.I., Belevich V.N., Zalesov A.S. New universal frame system of multi-storey buildings. <i>Beton i zhelezobeton.</i> [Concrete and reinforced concrete]. 1999. No. 1, pp. 2–4. (In Russian).
10. Research report: “Effective structural systems of multi-storey residential buildings and public buildings (12–25 floors) for construction conditions in Moscow and the cities of the Moscow region, which most fully meet modern marketing requirements.”BelNIIS. 2002. (In Russian).
11. Khandzhi V.V. Raschet mnogoetazhnykh zdaniy so svyazevym karkasom [Calculation of multi-storey buildings with a braced frame]. Moscow: Stroyizdat. 1977. 187 p.
12. Dykhovichny Yu.A., Maksimenko V.A. Sbornyy zhelezobetonnyy unifitsirovannyy karkas [Prefabricated reinforced concrete unified frame]. Moscow: Stroyizdat. 1985. 206 p.
13. Juvas K., Pousi O. Tempo – A new frame system for concrete elements. <i>Nordisk Betong.</i> 1990. No. 1, pp. 10–12.
14. Bausysteme mit gittertragern. fachgruppe betonbauteile mit gittertragern im BDB. Bonn. 1998. 40 p.
15. Schwerm D., Jaurini G., Deskensysteme aus betonfertigteilen. Informationsstelle beton-bauteile. Bonn. 1997. 37 pp.
16. Deltatek OY, Janti, Fin., Delta prefabricated monolithic frame. Company prospectus. 1998. 6 p.
17. Spirol Int. Ltd. Corefloor Extrusion Systems. London. Berlin, Bautech. 1997.
18. Weber H., Bredenbals B., Hullman H. bauelemente mit gittertragern. institut fur industrialisierung des buens. Hannover. 1996. 24 p.
19.
Review
For citations:
Kozelkov M.M., Lugovoy A.V. Monitoring of the regulatory framework in the field of design and construction of mechanical butt joints of high factory readiness for precast concrete and reinforced concrete structures of buildings. Concrete and Reinforced Concrete. 2021;605(3):3-11. (In Russ.)
Views:
56
Email this article 